Vaporesso Gen Max / SE Kits Preview – Welcome Return Of Box Mod & Tank?
It is great to see a resurgence in the in the “Box Mod & Sub Ohm Tank” format, this time the Vaporesso Gen Max / SE kits are in the spotlight.
Of course Vaporesso are no strangers to mod and tank kits, we have recently seen the Armour Max plus earlier kits such as the Gen 200 and Target 200.
More Details On The Vaporesso Gen Max / SE Kits…
The kit consists of the new Vaporesso Gen Max / SE box mod and the iTank T Sub Ohm tank.
The Gen Max mod is the larger of the two using 2x 18650 removable batteries. Whereas the Gen SE is smaller and uses only 1x 18650. The batteries of course are not included.
Although there are some differences I will cover both models in this preview.
Looking at the basics now and as you would imagine the power output is different between the two variants. The Gen Max will output 5-220W and the Gen SE is 5-80W.
Both devices have USB Type C ports for charging at a 2A charge rate.
On the Gen Max you will find a circular colour 0.96 inch TFT screen which has different screen themes with animated graphics to choose from. An LED indicator is there to give you information at a quick glance.
The fire button rotates to provide the means of adjustment. There is also a lock button to prevent accidental firing.
On the Gen SE, the 0.96 inch screen is a standard rectangular shape. Adjustment is via the up and down buttons located below the screen.
Inside the mods is the popular AXON chip which is found on a lot of Vaporesso box mods which gives you plenty of user mode options including:
·F(t) – is a flavour boosting mode
·PUL – Pulse mode – the power output is pulsed to provide a more stable output
·ECO – Eco mode – which is a standard Variable Wattage mode
·VV – Variable Voltage
·SMART – In this mode the mod will automatically set the output to match the coil installed
Both kits include the iTank T which is compatible with the GTi coil platform used on a lot of Vaporesso devices.
You get the 0.2ohm and 0.4ohm coils included in the kit.
With the Gen Max kit the tank capacity is 6ml and is 3ml for the Gen SE. Sadly this is reduced to 2ml for TPD regulated areas. You fill by sliding the top cap to reveal the fill port.
To help prevent leaks the airflow inlets are at the top of the tank. The incoming airflow is also adjustable.
Another measure to prevent leaking is the e-liquid recycling system which re-uses any condensation or e-liquid lying in the base of the tank by drawing it back up through the coil.
There are 7 colours to choose from for both models: Storm Blue, Dark Black, Arctic Silver, Ice Blue, Gradient Purple, Platinum Gold and Hot Pink.
Kit Includes
The kit contents are the same for both models – just the mod is different.
·Vaporesson Gen Max / Gen SE Mod
·Vaporesso iTank T
·GTi 0.2ohm Mesh Coil
·GTi 0.4ohm Mesh Coil
·Spare Glass
·2x O-ring
·Refilling silicone plug
·USB Type C cable
·User manuals
Vaporesso Gen Max / Gen SE Specs
·Size: 141.4×49.7×28.5mm – Gen Max / 141.4×35.6x26mm – Gen SE (including tank)
·Battery: 2×18650 – Gen Max / 1×18650 – Gen SE (not included)
·Display: 0.96in colour TFT screen – 3 themes to choose from
·Output: 5-220W – Gen Max / 5-80W – Gen SE
·User modes: Pulse, F(t), Eco (VW), VV, Smart
·Type C USB charging – 2A charge rate
·Resistance range: Not specified
·Axon Chipset
·Mechanical lock button
Vaporesso iTank T Specs
·Size: Not specified
·Capacity: 6ml (Gen Max) / 3ml (Gen SE)
·Coil: GTi coil range
·Top adjustable airflow
·Slide top fill
·Condensation re-circulation system
I have to say both kits look stunning and the top airflow iTank T should be great with the popular GTi coils!