How to Refill & Maintain Uwell Caliburn G3 Replacement Pods

If you love your Uwell Caliburn G3, then you understand how important it is to have your pods working for your best flavor and performance. Whether you are a new vaper or a seasoned vaper who has been vaping for decades, learning how to refill and care for your Uwell Caliburn G3 replacement pods will save you money and leave you with an always-smooth experience.

Nothing’s worse than a scorched hit, a leaky pod, or subpar vapor when you’re in the mood for a great puff. The silver lining? With some TLC, your Caliburn G3 pods will last longer and vape better. Let’s get into the best methods for refilling and caring for your pods so you can keep your vape in new condition.

How to Refill Your Uwell Caliburn G3 Replacement Pods Properly
Refilling a pod is easy, but filling it up the right way can be the difference between a good experience with your device and a poor one. Anytime you’ve had to experience leaks, gurgling, or wasted e-liquid, there’s a good chance something went amiss in the process.

Step 1: Prepare Your Pod
Start by removing the Caliburn G3 replacement pod from your device. It is magnetically held, so it should be easy to remove.

When you hold the pod in your hand, locate the top-fill port. This is where you place your e-liquid. The build is designed to minimize leaks, so refilling is simple.

Step 2: Choose the Appropriate E-Liquid
The e-liquid you vape is important. The Caliburn G3 pods prefer to vape nicotine salts or 50/50 VG/PG freebase e-liquids. If you vape a high-VG juice, you may find you get less vapor and a clogged coil in the long run.

Step 3: Fill with Care
Remove the silicone plug at the fill port and insert the nozzle of your e-liquid bottle. Squeeze gently, squeezing too hard will cause spills. Fill it to slightly below the max line so it won’t leak.

Step 4: Let It Sit
This is the critical step. Once you have refilled, allow your pod to sit for approximately 5-10 minutes. This gives the coil time to soak up the liquid completely, avoiding dry hits or burnt coils. If you don’t do this, you will experience a bitter, harsh flavor on your initial hit.

Step 5: Reinsert & Enjoy
Once your pod has been primed, put it back in your device. You’re now ready for smooth, great-tasting vaping!

How to Keep Your Uwell Caliburn G3 Pods in Perfect Condition
A properly cared-for pod is longer-lasting, more flavorful, and more functional. By using a few simple steps to keep your Uwell Caliburn G3 replacement pods in top condition, you can avoid infuriating issues like burnt hits, leaks, or poor vapor.

Clean Your Pod Regularly
With time, e-liquid residue can accumulate, impacting taste and performance. Remove your pod and clean it with a new tissue or cotton swab after each few refills. Do not rinse the coil with water, just keep the pod clean and dry.

Don’t Chain Vape If you’re the kind to puff puff puff without giving your coil a rest, you’re likely burning it out earlier than you have to. Take a quick break between puffs and allow the wick to re-saturate your vape. This small habit can save your pod a long way.

Monitor Your E-Liquid Levels
Letting your pod run too low on e-liquid is one of the quickest methods of burning out your coil. Monitor the e-liquid window and refill when it is near dry. If you do find yourself with a burnt flavor, it’s probably too late—time to switch to a fresh pod.

Use the appropriate ratio of e-liquid
If your pod is plugged up or not vaporizing sufficiently, inspect your e-liquid. 50/50 VG/PG works best. If you’ve been vaping high-VG e-liquid, it might be too thick for your coil to vaporize.

Replace Your Pod When Necessary
Even with the greatest care, pods are not immortal. If you begin to notice:

A burnt flavor
Insufficient vapor generation
Leaking issues

Time to be replaced with a new pod. A pod typically lasts 1-2 weeks on average, based on the vaping frequency.

Troubleshooting Common Pod Problems
Despite proper care, you might experience some minor pod issues. Here’s how you can fix them in a jiffy:

Leaking Issues
Make sure the silicone plug is closed tightly after refilling.
Don’t pack too tightly—leave a little space to equalize pressure.
Stand your vape upright to prevent leaks.
Burnt Hits
Always prime the coil on initial use.

Make sure your e-liquid is not too thick (50/50 VG/PG is best). Replace the pod if it continues to taste burnt it’s probably done. Weak Vapor Make sure your battery is charged. Replace with a different e-liquid that has a suitable VG/PG ratio. If it continues, you might need a new pod.

Just a few extra steps to fill and service your Uwell Caliburn G3 replacement pods correctly can make a whole world of difference. Your pods won’t only last longer, but your flavor will be improved, vapors will be smoother, and you’ll experience fewer maddening issues.