How Does the Smok Nord 2 Pod System Perform?

Basic Quick Start Guide

Before we get into how this kit performed, let’s take a quick look at how to set things up!

How to Fill the Pods and Change the Coils

I recommend you empty any liquid before changing to a new coil.

1.Pull the pod from the battery and remove old coil.
2.Prime the new coil by dropping a few drop of e-liquid onto the cotton within the coil.

3.Simply push the new coil into the pod.

4.Pull the rubber plug and fill with liquid replace the plug firmly.

5.Let the pod stand for 2/3 minutes so the cotton can soak up more e-liquid.

Basic Battery Operation

Before using the SMOK Nord 2 device for the first time please ensure you get that battery capacity maxed out with a full charge.
5 rapid clicks will turn the device on and off.
Click the fire button quickly 3 times until the wattage flashes holding the button down will alter the wattage adjustment from 1 to 40w with a round robin!
Note: there is no down adjustment.

Removing and replacing the pod will reset your puff count, or when the count reaches 999 puffs it will auto reset to 0.

Safety Protections

Pod Detection
Short circuit protection
8 second cut off
Low voltage protection